咨詢電話：0571-87212685
咨詢電話：0571-87212685產品列表PRODUCTS LIST
美國VICI通用色譜 兩通 三通 四通 等配件用于色譜分析的Valco配件通常是壓緊配件， 隨著螺母的擰緊，壓環被壓緊到管路上。為GC、HPLC和UHPLC中的高壓應用提供了理想的穩定性和可靠性。
美國VICI通用色譜 兩通 三通 四通 等配件
1、Microvolume Connectors--微體積連接器
當傳統的機械加工設備無法在典型的接頭、三通和四通上鉆納米孔時，這種混合兩件式設計是的。目前的加工技術已經進步到允許在標準裝配體中加工納米孔通道，至少對大多數材料來說是這樣。與初的兩件式設計相比，這些配件的制造成本更低，并提供了其他優勢。由于這些原因，我們正在將大多數材料轉換為一體式設計。除了少數例外，以前在微體積兩件式設計中可用的內容現在將在新的一體式設計中可用，在大多數情況下價格更低！
請注意，原來的微容積配件在配件中心有一個8-32螺紋安裝孔。在新的一體式版本中，此安裝孔是可選的。
2、Unions--直通/兩通
2.1 Internal unions--內螺紋直通
標準型
隔板型(可通過儀表面板或支架安裝。裝配體被咬邊，以便在擰緊安裝螺母時咬入面板，從而無需使用鎖緊墊圈。)
2.2 External unions--外螺紋直通/兩通
Standard External Unions --1/8" Tubing OD
2.3 Unions - External/Internal 直通 外螺紋/內螺紋
Standard external/internal unions
外徑
| 內徑 | 訂貨號 | |
|---|---|---|
| 1/16" | 0.25 mm | EZU1C |
| 0.50 mm | EZU1M | |
| 0.75 mm | EZU1 | |
| 1/16" | EZU1T |
* Unions for 1/32" and 1/8" tubing available as special-order items.
Bulkhead External/Internal Unions
The "Hole" heading in the table below refers to the size of the hole required for mounting the union through a bulkhead or panel.
| 外徑 | 內徑 | Hole | 訂貨號 |
|---|---|---|---|
| 1/16" | 0.25 mm | 5/16" | EZBU1C |
| 0.50 mm | 5/16" | EZBU1M | |
| 0.75 mm | 5/16" | EZBU1 | |
| 1/16" | 5/16" | EZBU1T |
2.4 1/32" External Union
1/32“外螺紋接頭專門設計用于GC中的毛細管柱
3、Reducing Unions - Internal變徑直通-內螺紋
Standard internal reducing unions
| Tubing OD | Bore | Product No |
|---|---|---|
| 1/16" to 1/32" | 0.15 mm | ZRU1.5XC |
| 0.25 mm | ZRU1.5 | |
| 0.50 mm | ZRU1.5L | |
| 1/32" | ZRU1.5T | |
| 1/8" to 1/16" | 0.25 mm | ZRU21C |
| 0.75 mm | ZRU21 | |
| 1/16" | ZRU21T | |
| 1/4" to 1/16" | 0.25 mm | ZRU41C* |
| 0.75 mm | ZRU41* | |
| 1/16" | ZRU41T |
* Available as a special-order item.
1/8" to 1/32" and 1/4" to 1/8" also available on special order.
Bulkhead internal reducing unions
The "Hole" heading in the table below refers to the size of the hole required for mounting the union through a bulkhead or panel.
| Tubing OD | Bore | Hole | Product No |
|---|---|---|---|
| 1/16" to 1/32" | 0.25 mm | 5/16" | ZBRU1.5 |
| 0.50 mm | 5/16" | ZBRU1.5L* | |
| 1/32" | 5/16" | ZBRU1.5T* | |
| 1/8" to 1/16" | 0.25 mm | 5/16" | ZBRU21C* |
| 0.75 mm | 5/16" | ZBRU21 | |
| 1/16" | 5/16" | ZBRU21T | |
| 1/4" to 1/8" | 0.75 mm | 5/8" | ZBRU42* |
| 2.0 mm | 5/8" | ZBRU42L | |
| 1/8" | 5/8" | ZBRU42T* |
* Available as a special-order item.
1/8" to 1/32" and 1/4" to 1/16" also available on special order.
4、Reducing Unions - External變徑直通-外螺紋
Standard External Reducing Unions
| Tubing OD | Bore | Product No |
|---|---|---|
| 1/8" to 1/16" | 0.75 mm | ERU21 |
| 1/16" | ERU21T |
5、Reducing Unions - External/Internal變徑直通-外螺紋/內螺紋
5.1
Standard external/internal reducing unions
| Tubing OD | Bore | Product No |
|---|---|---|
| 1/8" to 1/16" | 0.25 mm | EZRU21C* |
| 0.75 mm | EZRU21 | |
| 1/16" | EZRU21T* | |
| 1/4" to 1/16" | 0.25 mm | EZRU41C* |
| 0.75 mm | EZRU41 | |
| 1/16" | EZRU41T* |
* Available as a special-order item.
Also available: 1/16" to 1/32", 1/8" to 1/32", and 1/4" to 1/8"
Bulkhead external/internal reducing unions
The "Hole" heading in the table below refers to the size of the hole required for mounting the union through a bulkhead or panel.
| Tubing OD | Bore | Hole | Product No |
|---|---|---|---|
| 1/8" to 1/16" | 0.75 mm | 5/16" | EZBRU21 |
| 1/16" | 5/16" | EZBRU21T |
* Available as a special-order item.
Also available: 1/16" to 1/32", 1/8" to 1/32", 1/4" to 1/8", and 1/4" to 1/16"
5.2
Standard internal/external reducing union
| Description | Bore | Product No |
|---|---|---|
| 1/16" internal to 1/32" external reducing union | 0.25 mm | EZRU.51 |
| 0.50 mm | EZRU.51L | |
| 1/32" | EZRU.51T | |
| For tubing OD: | ||
| 1/32" FS adapters (pkg. of 5) | ≤ 0.20 mm | FS.2-5 |
| 0.20 mm ≤ 0.25 mm | FS.25-5 | |
| 0.25 mm ≤ 0.36 mm | FS.36-5 | |
| 0.36 mm ≤ 0.40 mm | FS.4-5 | |
| 0.40 mm ≤ 0.50 mm | FS.5-5 | |
| 0.50 mm ≤ 0.80 mm | ZF.5V-5 |
Bulkhead internal/external reducing unions
The "Hole" heading in the table below refers to the size of the hole required for mounting the union through a bulkhead or panel.
| Description | Bore | Hole | Product No |
|---|---|---|---|
| 1/16" internal to 1/32" external reducing union, bulkhead version | 0.25 mm | 5/16" | EZBRU.51 |
| 0.50 mm | 5/16" | EZBRU.51L | |
| 1/32" | 5/16" | EZBRU.51T | |
| For tubing OD: | |||
| 1/32" FS adapters (pkg. of 5) | ≤ 0.20 mm | FS.2-5 | |
| 0.20 mm ≤ 0.25 mm | FS.25-5 | ||
| 0.25 mm ≤ 0.36 mm | FS.36-5 | ||
| 0.36 mm ≤ 0.40 mm | FS.4-5 | ||
| 0.40 mm ≤ 0.50 mm | FS.5-5 | ||
| 0.50 mm ≤ 0.80 mm | ZF.5V-5 | ||
發郵件給我們：alab17@163.com